Products

SayWeather Pro2

$9,995

Upgrade to SayWeather Pro2 for enhanced weather advisory capabilities, offering on-demand surface-weather updates round the clock with minimal mic inputs. With compatibility for all VHF-radio equipped aircraft, ensure timely weather insights for every flight operation at your airport, optimizing safety and efficiency.

More Info

SayWeather Pro2 includes a “NIST-traceable” calibrated, triple redundant precision altimeter for reliable, high-accuracy altimeter settings and SayWeather Pro2 uses only “NIST-traceable” calibrated Davis Vantage PRO2 weather stations. The Davis Vantage PRO2 has a separate anemometer and wind vane making installation easy and hassle-free. The light-weight anemometer can be installed on a light-duty pole reducing the need for guying and more-expensive mounting systems. The solar-powered, battery-backed, wireless weather station’s integrated sensor suite (ISS) is typically installed about 6 feet above ground level and can be located up to 40 feet from the anemometer/wind vane. The ISS also incorporates 24-hour solar-powered, battery-backed, fan aspiration for accurate temperature and dew point measurement which enables density altitude reporting in advisories. SayWeather Pro2 comes standard with “publish to internet” capability (thru Ethernet, WiFi optional) adding even more value for pilots needing access to current airport weather conditions when flying in from a distant airport.

Features

SayWeather Pro2 equips virtually every aircraft that operates into or out of your airport with in-cockpit local weather advisories, all with no new equipment in the aircraft and at no cost to the aircraft owner, and SayWeather Pro2 is packed with features and benefits:
- Precision redundant barometric pressure sensor for high-accuracy altimeter setting – exceeds FAA’s AWOS/ASOS accuracy requirements (when calibrated and operated as specified).
- Fully user-configurable advisories, including number of mic-key clicks to activate, weather parameters, male or female voice, special announcements and more.
- Two (touch-screen-selectable) alternate advisory sets allows easy replacement of the default advisory with special advisories, for example “airport closed”, or “fly-in parking on south ramp only”. Simply touch “Normal” to return to the default advisory.
- Clear 5 Watt (P.E.P) transceiver provides 10 nautical mile range at pattern altitude and up to 30 nautical miles at higher altitudes.
- Davis Vantage PRO2 weather station is solar powered and lithium-primary-battery-backed to ensure reliable continuous operation even under prolonged overcast conditions. Separate anemometer/wind-vane enables low-cost easy installation.
- AWOS/ASOS algorithms for consistent, accurate advisories.
- GPS-based time keeping.
- Attached speaker/microphone for voice transmission when needed.
- Monitor radio traffic by connecting the PRO+’s “audio line-out” to amplified external speakers or a PA system.
- Fully integrated system (21″ W X 17″ H X 7″ D) mounts easily on wall or in cabinet.
- Bright touch screen for easy set-up and control. Bright easy-to-read “weather” display show current conditions and is updated every 5 seconds.
- Up to 1000′ wireless range between weather station installation site and SayWeather Pro2. Longer range (up to a mile) is available using optional solar-powered repeaters.
- Publish live weather to the internet (thru Ethernet, or optionally WiFi) for remote weather access via phone, tablet or PC.
- Ships with “NIST-traceable” calibration for all weather sensors.
- SayWeather Pro2 is compatible with the full suite of SayWeather‘s wired and wireless airport lighting controllers.

SayWeather PRO+

$11,995

Elevate your aviation operations with SayWeather PRO+, featuring advanced visibility and sky condition capabilities. Access on-demand surface-weather advisories 24/7 with just a few key presses, ensuring safety and efficiency for all VHF-radio equipped aircraft at your airport.

More Info

SayWeather PRO+ includes a “NIST-traceable” calibrated, triple redundant precision altimeter for reliable, high-accuracy altimeter settings and SayWeather PRO+ uses only “NIST-traceable” calibrated Davis Vantage PRO2 weather stations. The Davis Vantage PRO2 has a separate anemometer and wind vane making installation easy and hassle-free. The light-weight anemometer can be installed on a light-duty pole reducing the need for guying and more-expensive mounting systems. The solar-powered, battery-backed, wireless weather station’s integrated sensor suite (ISS) is typically installed about 6 feet above ground level and can be located up to 40 feet from the anemometer/wind vane. The ISS also incorporates 24-hour solar-powered, battery-backed, fan aspiration for accurate temperature and dew point measurement which enables density altitude reporting in advisories. SayWeather PRO+ comes standard with “publish to internet” capability (thru Ethernet, WiFi optional) adding even more value for pilots needing access to current airport weather conditions when flying in from a distant airport.

Features

SayWeather PRO+ equips virtually every aircraft that operates into or out of your airport with in-cockpit local weather advisories, all at no cost to the aircraft owner, and SayWeather PRO+ is packed with features and benefits:

Precision redundant barometric pressure sensor for high-accuracy altimeter setting – exceeds FAA’s AWOS/ASOS accuracy requirements (when calibrated and operated as specified).
Fully user-configurable advisories, including number of mic-key clicks to activate, weather parameters, male or female voice, special announcements and more.
Advisory weather includes: winds, gusts, temperature, dew point, altimeter setting, density altitude and optionally visibility, present weather, sky condition and ceiling.
Two (touch-screen-selectable) alternate advisory sets allows easy replacement of the default advisory with special advisories, for example “airport closed”, or “fly-in parking on south ramp only”. Simply touch “Normal” to return to the default advisory.
Clear 5 Watt (P.E.P) transceiver provides 10 nautical mile range at pattern altitude and up to 30 nautical miles at higher altitudes.
Davis Vantage PRO2 weather station is solar powered and lithium-primary-battery-backed to ensure reliable continuous operation even under prolonged overcast conditions. Separate anemometer/wind-vane enables low-cost easy installation.
AWOS/ASOS algorithms for consistent, accurate advisories.
GPS-based time keeping.
Attached speaker/microphone for voice transmission when needed.
Monitor radio traffic by connecting the PRO+’s “audio line-out” to amplified external speakers or a PA system.
Fully integrated system (21″ W X 17″ H X 7″ D) mounts easily on wall or in cabinet.
Bright touch screen for easy set-up and control. Bright easy-to-read “weather” display show current conditions and is updated every 5 seconds.
Up to 1000′ wireless range between weather station installation site and SayWeather Pro. Longer range (up to a mile) is available using optional solar-powered repeaters.
Publish live weather to the internet (thru Ethernet, or optionally WiFi) for remote weather access via phone, tablet or PC.
Ships with “NIST-traceable” calibration for all weather sensors.
SayWeather PRO+ is compatible with the full suite of SayWeather‘s wired and wireless airport lighting controllers.

NEW

SayWxAir

Get ready for unparalleled connectivity. SayWxAir is a subscription-based web service that compliments SayWeather and provides even more convenience and confidence for airport owner-operators and pilots alike.

Airport Lighting

Elevate your airport lighting control with SayWeather PAL controllers, offering both “wired” and “wireless” options tailored to your installation needs. Opt for seamless integration and cost-effective solutions with our wired PAL for nearby installations, or enjoy flexibility and convenience with our wireless PAL for distant locations, ensuring optimal performance and efficiency for your airport operations.

_{**Wireless Model Shown}

More Info

SayWeather PAL (pilot-activated lighting) controllers are offered in two types – “wired” and “wireless”. Wired and wireless refers to the signal that is used by SayWeather to control airport lighting. The lighting control signal is either hard-wired between SayWeather and the lighting power control relay or the control signal is wirelessly connected between SayWeather and the airport lighting power control relay. Use the wired PAL type for the case where the high-voltage control of airport lighting is close to the SayWeather installation location. Use the wireless PAL type for the case where high voltage control of airport lighting is a far distance from the SayWeather installation location, or, the case where routing a control wire to the high-voltage lighting control point is cost prohibitive.

SayWeather lighting controllers are offered in 1-channel (PAL-1) or 3-channel (PAL-3) versions. The PAL-1 controller is great for basic on – off control of airport lighting. The PAL-3 lighting controller provides for control of 3 lighting zones (or 3 different lighting intensities if the airport is equipped with constant-current lighting-intensity-control equipment). Up to three PAL-1 lighting controllers can be daisy-chained to provide the same functionality as the PAL-3… the lighting control system can grow as the airport’s needs grow.

SayWeather PAL controllers include a full set of user-programmable features:

automatic turn-on and turn-off at sunrise and sunset
selectable delayed turn-off (after sunset) and early turn-on (before sunrise)
user-configurable mic-key-count for pilot activation of airport lights
audio acknowledgement, over the VHF transceiver, of receipt of pilot-activated lighting command
selectable on-duration for pilot activated lighting.

The SayWeather PAL controllers can be interfaced with industry-standard constant-current airport lighting-intensity-controllers as the PAL controller’s output relay contact ratings exceed those specified in the FAA’s L-854 circular for lighting intensity control electrical contacts. Further, SayWeather can be configured to support a modified “style A” or “style B” intensity control configuration where control relays are actuated individually or actuated and held-closed in sequence. SayWeather PAL controllers use UL-recognized power relays that are rated for 10 Amps (tungsten lighting) at 120VAC and 20 Amps at 277VAC.

(Note: while SayWeather PAL options provide a reliable and easy-to-use solution for airport lighting control, SayWeather PAL options do not fully conform to the FAA’s L-854 specification. Further, SayWeather PAL options are not designed to operate at temperature limits, humidity limits and under certain operating conditions noted in the FAA’s L-854 specification. SayWeather, the PAL-1 and PAL-3 lighting controllers, and attached components, are intended to be installed and operated in an indoor environment. Do not install these components outdoors unless appropriate additional environmental protection is provided. SayWeather PAL-1W and PAL-3W are designed to withstand typical outdoor temperature and humidity conditions and can be mounted and operated in an outdoor location.)

Precision Altimeter

SayWeather PRO+ offers unmatched accuracy exceeding AWOS standards, hassle-free calibration, quick replacement, and 6x redundancy for reliability. Additional features include automatic heating, RS-232 and optional Ethernet interfaces, OLED display, and customizable units, ensuring optimal performance.

Features & Benefits

Better than AWOS accuracy when operated in accordance with Connectsix recommendations — accurate to better than 0.02 in. Hg.
Convenient calibration service keeps your SayWeather PRO+ system accurate throughout the year
Easy to remove and replace — typical exchange process takes less than 5 minutes and requires no tools
Triple redundancy and three separate pressure ports for maximum reliability. Ports can be operated in parallel or routed to independent pressure sources to ensure continued operation even if one port becomes iced or clogged
Internal automatic heating to prevent condensate in any conditions
RS-232 and Ethernet interfaces for custom applications
AWOS algorithms for accurate and consistent altimeter settings
Internal sensors are continuously monitored for accuracy and flagged if any errors occur
Bright easy-to-read OLED display shows current altimeter setting, station pressure, sensor status and more
Compatible with “Gill” pressure ports
Selectable display units: millibars or in. Hg

Products

SayWeather Pro2

$9,995

SayWeather PRO+

$11,995

SayWxAir

Airport Lighting

Precision Altimeter

Contact Us Today